M.B. Consultant Ltd.
Putting Glass Walls on Slaughterhouses So We Can See Behind Closed Doors from FAUN Friends Of Animals United

Address: 5190 Main St, South Fallsburg, NY 12779
Establishment No.: p18414

USDA Inspection Report: 16 Jul 2010

Code: 06D01
Violation:  416.1, 416.3(a)

Citation: At approximately 0930 while performing an unscheduled 06D01 procedure, the following non compliances were found: the table under the poly bag sealer near the end of the freeze tunnel had two areas on its top where the welds were uneven and rough. There were also uneven and pitted welds found throughout the entire conveyor leading from production into the cooler, and on the outer cover of the blade of the shell splitter saw. On the whole bird out the frame of the round wheel has multiple rough welds. In addition, on multiple areas of the guide bars and the over head troughs near inspection stand number #2, as well as table and stand for the lung gun on the reprocessing line. This non compliances are a direct violation of 416.1. Acting QC director was notified of these non compliances. This document serves as written notice that failure to comply with regulatory requirements could result in additional regulatory or administrative actions.

Regulation:

416.1 Each official establishment must be operated and maintained in a manner sufficient to prevent the creation of insanitary conditions and to ensure that product is not adulterated.

416.3(a) Equipment and utensils used for processing or otherwise handling edible product or ingredients must be of such material and construction to facilitate thorough cleaning and to ensure that their use will not cause the adulteration of product during processing, handling, or storage. Equipment and utensils must be maintained in sanitary condition so as not to adulterate product.

 

Next Report: USDA Inspection Report: 21 Jul 2010
Previous Report: USDA Inspection Report: 15 Jul 2010

Return to: M.B. Consultant Ltd
Return to: New York Slaughterhouses
Return to: Slaughterhouses